Non-Invasive Inductive Moisture Meter for Drywall, Masonry etc
Detect Moisture of different hard materials like drywall, masonry, softwood, hardwood etc. It give audio alarm if reading is out of range. Moisture display result is displayed on LCD and LED bars. Measure moisture without damaging the surface. Ideal use for wood / timber industry, building material storage drywall, fabric and paper.
- It measures by emitting and picking up electro-magnetic signals through the material to be tested.
- it checks and adjust the calibration of the unit, therefore manual calibration is no longer necessary.
- Data hold function ,lock readings and green backlight Low battery indicator and auto power off.
- The reading displayed is an average value of the moisture content from the entire surface area and the maximum depth of penetration. Moisture which is closer to the surface has a greater effect on the average value than the moisture close to the maximum depth of penetration.
Measurement Range : 0%~53% ( Softwood ) ; 0%~35% ( Hardwood ). Measurement Precision : ±4% (Softwood, Hardwood). Maximum Sense Depth : 3/4 inch (20mm). Power source : 1 x 9V Battery (not included). Auto power Off : 2 minutes inactive LED Moisture Content Indicator. Working Temperature : 0 ~ 40°C. Storage Temperature : -10 ~ 50°C. Storage humidity : 5% ~ 95%. RH Dimension : 170 x 75 x 30mm. Weight : About 150g. Moisture readings of drywall and masonry are relative values