25-35% NITRO OBD11 FOR PETROL/GASOLINE CARS

Description

• NitroOBD2 is a plug and drive ready to use device that increases the performance of engine.35% More Power, 25% More torque.
• It works based OBD2 protocols as remaping the Car’s computer ECU.
• According to your driving habits, NitroOBD2 makes new map in the car’s computer ECU to increase the performance of your car. As you drive further, it renews the map thereby increasing the vehicle’s power and torque.
• It is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance.
• When it’s plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU, NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
• Plug the NitroOBD2 into the OBD2 connector of your car, turn the ignition on for 30 seconds, then turn the engine on.
• Settings are optimal and the best for your car. Even the parameters are different for each vehicle, you might not need to make an extra adjustment.
• It will recognize your vehicle and your driving habits after around 200 km/150 miles driving, and then adjusts itself to perfectly match your car.
• Very easy to install. Just plug it into the OBD2 connector of your car. Fits all cars from the year 1996.

Installation

1. Pull the Car Key out of the ignition.
2. Find OBD2 connector in your car and Plug in NitroOBD2 chip tuning box.
3. Insert the key into the ignition and turn the key to the first stage. (Do not start the car).
4. Press the reset button for about 5 sec. After releasing the button, wait for about 30-54 sec. (NitroOBD2 Chip Tuning Box will establish connection with ECU).
5. Start the engine.