CAR TYRE TREAD DEPTH GAUGE METER

Description

• Car Tyre Thread Depth Guage Meter gives very accuratemeasurement, the use of the special metal probe and zero setting makes it reliable and easy to measure.
• The measured value is displayed when the surface of the tool is perpendicular to the tire surface, and the measuring rod is inserted into the bottom of the Tyre.
• Made of quality ABS plastic.
• Lightweight and easy to carry, wear and fall-resistant.
• It’s LCD display makes it very easy to read results.
• Can be used widely in tread depth, brake shoe and pad wears.
• Measuring Range: 0-25.4mm.
• Resolution: 0.01mm.
• Working temp: 0-40℃.
• Power supply: button battery (not included) 

Note

1. Keep the gauge clear
2. No water oil on bar
3. Remove battery when not in use for a long time
4. Display flashes when battery power is low
5. Accidental display failure: take out battery for 30 seconds

Instructions

• Turn on the machine and check if the display is OK
• Place the measuring surface close to the flat surface, push the measuring rod to the end, press the zero buttons to display 0.00
• Make sure the measuring surface is perpendicular to the tire surface, and the measuring rod is inserted into the bottom of the tire to display the measured value.